QikFIT Data / AV and Leads
QikFIT modules are compatible with OE Elsafe power rails, table boxes, floor and ceiling boxes
QikFIT modules click into the OE PRODIGY cable basket.
Data panels available to fit industry standard cutouts.
OE Elsafe offer a wide range of QikFIT Data and AV cutouts and couplers designed to fit OE Elsafe power rails, table boxes, floor and ceiling boxes. All QikFIT modules simply click into the OE PRODIGY cable basket for fast installation. QikFIT can also be fitted directly into screens up to 3mm thick or when using a Thick Panel Frame can be installed into panels from 3mm to 14mm thick.
Once installed, QF5 tiles can be removed from the front to allow for easy replacement when reconfiguring or to allow access to the back of the tile for termination.
Data / AV tiles can be supplied with fully tested pre-terminated cables or alternatively the tiles can be provided with cutouts to accommodate all brands of data jacks including Clipsal style (referred to as AUNZ data jacks) and Keystone style data jacks.
OE Elsafe also offer QikFIT Data panels designed to fit industry standard cutouts. These panels are available pre moulded to accept 4 AUNZ data jacks without the need for an adaptor bezel or alternatively panels are available with two angle data bezels to allow for shallow cavity situations preventing tight bend radii.
Blank tiles are also available to fit any cutout size or alternatively can be used for blanking purposes. Please contact our friendly OE Elsafe team for any other data requirements.
QikFIT Power
Soft / Hard Wired
QikFIT 2GPO TUF
USB Type-A and Type-C
QikFIT TUF
USB Type-A and Type-C
QikFIT TPF
Panel Mounted Power
- QF5 Tile Data
- QF5 Tile Audio Visual
- Soft Wired Data
- Compatible Products
- Fitting
- Resources
- Codes Data
- Codes AV
- Contact Us
QF Tiles
Available in white, black and grey
 |
 |
| QF5 AUNZ Data Cutout | QF25 AUNZ Data Cutout |
 |
 |
| QF25 2 x Angled AUNZ Data | QF5 Keystone Cutout |
 |
 |
| QF5 Blank | QF25 Blank |
Keystone Adaptors
OE Elsafe can provide Keystone style adaptors in eight different colours to work in conjunction with the Keystone Data tiles. These colour coded data outlet markers allow for easy data cable identification as well as allowing for the face of the data jack to sit flush in the keystone cutout creating a stylish finish.
QF Tiles
Available in white, black and grey. Other types of Audio Visual couplers and cutout are available on request.
 |
HDMIQF5 – HDMI Coupler |
 |
USB (Data Transfer)QF5 – USB Coupler |
 |
VGAQF5 – VGA Coupler |
 |
AudioQF5 – Audio Coupler |
 |
RCA x 1QF5 – RCA Coupler |
 |
RCA x 2QF5 – RCA Coupler |
 |
RCA x 3QF5 – RCA Coupler |
Keystone Adaptors
OE Elsafe can provide Keystone style adaptors in eight different colours to work in conjunction with the Keystone Audio Visual couplers. These colour coded outlet markers allow for easy data cable identification as well as allowing for the face of the data jack to sit flush in the keystone cutout creating a stylish finish.
Soft Wired Data
The open plan office is now the norm for the modern work environment all over the world. Workstations, hot-desking, conferencing and break out areas are all competing for the same space and the ability for the furniture and cabling infrastructure to adapt, to the changing needs of a business, quickly and at low cost is now paramount and the need for soft wiring has never been greater.
Data network cabling is not immune to this evolution, and, whilst transmission speeds are increasing (from CAT5e to CAT6, CAT6A and even CAT7), the ISO/IEC has set standards to ensure that network cabling manufacturers allow for a flexible architecture (see example and schematic below).
For an adaptable workspace, the most important part of the architecture is the Consolidation Point (CP) which provides a plug-and-play connection between the two sections of the Permanent Link.
At OE Elsafe we have a wide range of power and data solutions that suit both floor-fed and ceiling-fed applications. Our workstation, desk or table mounted accessories enable power and data points to be presented to the user in a single, easy to use and visually appealing package – the Terminal Outlet (TO).
The connection between CP and TO has specific requirements and Elsafe is able to draw on 20 years of market leading experience in soft wired data from its parent company, OE Electrics (UK), providing an unrivalled family of products to suit any application, each of which has been primarily engineered around the electro-mechanical characteristics of the data cabling. So strong is the desire to accommodate data in compliance with the standards, we have even developed adaptors where data manufacturers have no suitable alternative.
Options of factory installed data, whether generic (provided with OE Elsafe warranty) or branded (where ‘Channel’ warranties are expected) can simplify installation and reduce costs whilst at the same time improving quality through 100% end of line testing.
The key advantage of ending the Permanent Link with soft wiring is that it provides a modular, reconfigurable solution for work area changes – CHURN. As the Horizontal Cable does not need to be re-run, the office layout can be altered cost effectively and with minimal down time, allowing business operations to continue virtually uninterrupted.
Desk Solutions
OE Elsafe desk solutions were all designed around the data cabling, taking into account branded socket depths and large bend radii requirements.
In-Desk Solutions
Our In-Desk solutions also ensure that data outlets are easily accessible to the user.
Cutout Dimensions
For assistance and pricing please contact,
Australia: ✉ sales@oeelsafe.com.au ☏ +61 2 9454 7500 / 1300 357 233
New Zealand: ✉ sales@jackson.co.nz ☏ +64 9 634 3376 / 0800 543 348